top of page
header-bullet.jpg

Testing & Performance

Every Velocitas round is machined from solid copper, run through the FBI barrier protocol, and evaluated by independent labs.

 

VX9 - 9mm 96gr Solid Copper (20 & 50 ct)

Machined from solid copper to drive through hard barriers - glass, steel, auto doors - and deform in a controlled way that expands its surface area while holding together.

Tested: 16" gel penetration with controlled expansion, about 1,270 fps from a Glock 17 pistol, measured 15 feet from the muzzle. Holds together through auto glass and doors with no deflection. FBI-protocol tested. 

​

VX223 - .223/5.56 60gr Solid Copper

A lead-free .223 built for barriers. On impact its petals shear off by design, leaving a solid core that keeps driving straight and deep - lower retained weight is the design working, not a failure.

Tested: about 2,717 fps from a 14.5-inch barrel with our standard load. Our LE load is FBI-protocol tested.

​

Full data available on request.

A 10% Clear Ballistics gel block with a tape measure alongside, showing two wound tracks: Velocitas VX9 above and Hornady Critical Duty 135 grain below.

VX9 on top, Hornady Critical Duty 135 gr on the bottom. Same 10% Clear Ballistics FBI-calibrated block.

A 10% Clear Ballistics gel block showing the wound track of a Velocitas VX223 solid copper round, with two sheared petals visible below the main track.

VX223 in a 10% Clear Ballistics FBI-calibrated block. The petals shear off on impact by design — two of them are visible below the main wound track.

Round
Caliber
Weight
Expansion
Penetration
Velocity
VX9
9mm (.355")
96 gr
0.481"-0.539"
16" (gel)
~1,270 fps (Glock 17 pistol, measured 15 ft from muzzle)
VX223 standard load
.223/5.56 (.224")
60 gr
Petals shear off by design (fractures, doesn't expand); 78-80% weight retained
19.5" bare gel · 20" jeans · 19" windshield (14.5" barrel, 1 shot each)
~2,717 fps (14.5" barrel, measured Mar 2026)
VX223 LE load · FBI protocol
.223/5.56 (.224")
60 gr
0.256"
16.86"
2,307 fps (11.5" barrel)
bottom of page